Description
The perfect partner for VIO L212 in larger sound reinforcement applications. A simple, effective dual sub configuration designed to enhance the reproduction of the lowest frequencies, boosted by an advanced DSP control and complete network capability.
Built For Touring
Featuring a dual 18" subwoofer pairing in a voluminous bass-reflex housing, VIO S218 encompasses a vigorous audio performance and a ultra low frequency punch, extending down to 28 Hz: the perfect bottom-end addition to large VIO L212 sound reinforcement systems.
Real Time Control
As a default, VIO S218 is equipped with dBTechnologies RD-Net card, for real time remote control via Aurora Net software.
Furthermore, the preamplifier is ready for future upgrades with Audinate DanteTM AoIP protocol. To help users in this configuration, S218 comes with built-in technologies: Near Field Communication (NFC™) proximity sensors are used to determine the position of each box within an array. This technology, together with a hi-brightness LED bulb on the front of the enclosure, contributes to help the user to recognize, identify and match each box physical position on the remote control software Aurora Net.
The amp also allows users to run auto-test on electronics and transducers before and after use and a real time impedance control. This unique system ensure tour-grade reliability and remote control over your entire PA’s health.
Cardioid Preset
A cardioid stack preset button automatically process the sound of the backward sub in gradient inverted stack configurations, in order to reach maximum cancellation of the rear side.
The on-board delay module allows VIO S218 to reach a max 9.9ms delay with 0.1 ms steps.
Features at a Glance:
- 2X 18″ Neodymium woofers
- 3200W RMS Digipro G4 AMP technology
- Full range smps with pfc
- SMPS 380V Resistant
- Frequency range extending down to 28 HZ (-6DB)
- Opto-isolated floating preamp board
- Modular slot for network and digital audio expansion cards
- ON Board Delay Up To 9.9ms
- Cardioid stack preset button
- NFC + Front LED identification system
- System test for quick transducers diagnostics
- IPOS Intelligent power-on sequence
- Full compatibility with VIO S318 accessories
Specifications:
| Acoustical data |
|
| Frequency Response | [- 10 dB]: 27 Hz (HPF) |
| Max SPL | 143 dB |
| LF | 2x18” Neodymium |
| Voice Coil LF | 4" |
| Amplifier |
|
| Amplifier | 3200 W RMS [2x 1600 W RMS Class-D Digipro G4] |
| Cooling | Passive convection, internal fan |
| Power Supply | Full-range SMPS with PFC, (100V~-240V~, 50-60Hz) |
| Processor |
|
| Controller | DSP 32 bit |
| AD/DA Converter | 24 bit/96 kHz |
| Limiter | Peak, RMS, Thermal |
| Delay Option | 0 - 9.9 ms internal | steps of 0.1 ms [on-board] |
| Crossover Frequency LF-HF | Selectable 60-110 Hz + Full Range (8 steps) |
| LF-Xover out slope | 24 dB/Octave |
| Input |
|
| Signal Input | 1 x XLR balanced, 1 x RJ45 Link (RDNet) |
| Signal Output | 1x XLR balanced, 1 x RJ45 Link (RDNet) |
| Power Socket | 1x PowerCON TRUE1 In, 1x PowerCON TRUE1 Out |
| Controls | 1x Input Attenuation Rotary Encoder |
| Special Features | NFCTM and Frontal LED Identification System, 380V Resistant SMPS, IPOS Intelligent Power-On Sequence, Opto-isolated floating pre-amp, System Test (transducers diagnostics) |
| Mechanics |
|
| Housing | Multiplex plywood - Polyurea painting |
| Handles | 4x Side. Aluminium |
| Raincover | Included |
| Rigging Points | 2x Pick Points on top for DRK-210 rigging frame |
| Dimensions | Width: 1300 mm |
| Weight | 85.6 kg |